Replicating Self-Running RPG project, 1920's Ammann Atmospheric Generator, and

Published: Tue, 01/09/24

TOPIC

Hi ,

We hope your 2024 is off to an amazing start!

We want to encourage you to pay attention to the Self-Running motor thread - can anyone replicate the results like what Mike Clarke and Paul Babock has achieved? We believe that by following some basic principles that it is definitely replicatable. It's also a great reason for me and others to get active again in the forums because out of all the open-source discussions online regarding these topics, Energetic Forum has always led the way. Unfortunately, it's been neglected for a long time, but it is still full of priceless information that includes a lot of developments that were the genesis of a lot of presentations at the ESTC events! More to come...



SELF-RUNNING RPG (REACTIVE POWER GENERATOR) REPLICATION THREAD STARTED IN ENERGETIC FORUM - WHAT IS TIME???

Mike Clarke's RPG is a self-running air core SG made possible with collaboration with Paul Babcock over the years. It's really a higher voltage, high speed, spike charger using an air core with battery swapper rather than using reactive power but nevertheless, it works! Mike has presented multiple times at the ESTC and Paul presented on the parameters that you need to apply to replicate it, which is essentially the recipe for success.

I've been inactive in both of my forums https://energyscienceforum.com and https://energeticforum.com for a very long time. REGISTRATION IS FREE! We'll be updating the forums a bit and will become more active in them. There is so much email regarding technical questions about different circuits, etc. and rather than having to repeat ourselves over and over, the only place where any technical support for the various projects or technologies that have been presented on over the years at the conference or in other published material.

The spike is high voltage and ultra narrow width meaning all the time is locked up in the pressurized, polarized ether. When you deliver that to a battery, you are delivering TIME POTENTIAL to it. When you store that time potential over and over, you can then draw a load at a decompressed pressure (lower voltage) over time, meaning you get TIME back out of it because those spikes have the potential for time to exist or flow. Dismissing all the romatic nonsense about time will get you ahead faster because you can then see time for what it is. It is motion thru the aether and the density of that aether is what governs the rate at which time will flow.

The more dense the aether, the slower time ticks and the less dense, the faster time ticks. If you're observing time, you're observing it from a certain density of aether that you are in. Everything slows or speeds accordingly so it will always look like time is moving at a constant. From an absolute or omnipotent point of view being able to see two areas of high and low density aether, then it can be observed that one has slow time ticking and one has fast time ticking but to each observer, they can't tell a difference. This is the mechanism that allows relatavistic effects to manifest and it is solely dependent on the density of the aether.

This is redundant, but...

So TIME is really simple, it is engineerable and TIME is just a measurement of the rate of flow thru the aether and the rate is goverened by the density of the aether. You charge a coil such as in a Bedini SG or any inductor that you expect to get a collapsed spike back out of it. You charge it with say 12 volts over x amount of time (just enough time to get the magnetic field to max). The magnetic field you created displaces the aether. When the switch turns off, the aether rapidly pushes that magnetic field back into the coil and that is what the collapsed magnetic field is and why it collapses so fast. It is so fast, it induces a very high voltage spike with a pulse width that is so narrow, there is almost no time component to it. Those spikes are what you send to a battery, capacitor or whatever. The time used to charge the coil has been recompressed into higher pressure aether and the higher the pressure, the more narrow the pulse width because all that time has been converted back into TIME POTENTIAL so the spike is literally time potential and on the collapse, it can pull more aether in with it to polarize than what went out to begin with. Again, store it and then draw a load later and you get lower voltage over a period of time because the time potential decompressed so now you have real work in watt seconds. You're getting the TIME back out of TIME POTENTIAL.

The only presentation that goes into this simple and engineerable concept of time is my presentation Hacking the Aether, which is 50% off for a limited time. Go here: https://emediapress.com/shop/hacking-the-aether/

The RPG replication thread is on Energetic Forum here - it's free to join: http://www.energeticforum.com/forum/energetic-forum-discussion/renewable-energy/512668-reactive-power-generator-rpg-replication-project

Mike Clarke's RPG presentations, Paul Babcock's They Are All the Same presentation and the three Bedini SG (beginner, intermediate and advanced) books and the trilogy are also 50% off for a limited time. The Bedini SG books are highly recommended as is a small SSG build if you're a beginner and don't know where to start because that is where all of this came from to begin with. Links to those presentations are in forum discussion in the above link.



50% OFF SELECT PRESENTATIONS

All of Mike Clarke's presentations, Paul Babcock's They are all the Same presentation, Bedini SG individual books and Trilogy, my Hacking the Aether presentation and Chris Machado's Ether Drift presentation package are all 50% off until the middle of next week. For the RPG replication, all those presentations are all connected and I'll spell out some of that in the RPG replication thread. DISCOUNT SALE PRICE AUTOMATICALLY SHOWS UP!

 

ETHER DRIFT - EXPERIMENTS WITH THE VERTICAL COMPONENT BY CHRIS MACHADO - MORE VIDEOS & DATA RELEASED!

This presentation was given by Chris Machado at the ESTC in July of last year. The interferometer tests (bouncing light around a rotating platform) are the gold standard when it comes to validating or failing to validate the aether. It has been done many times over the years showing strong evidence of the aether but typically, interferometers were done with a rotating platform revolving around a vertical axis like a record on a record player. Around 2008 or so, Martin Grusenick from Germany contacted me about his experiments with a horizontal axis interferometer that spins around like a Ferris Wheel. On that plane, some astounding results showed up indicating that the aether may indeed be moving from above and toward the ground direction - that gives strong evidence that the displacement model of the aether as mentioned in Hacking the Aether may in fact be very close to the truth.

Chris has replicated several of these interferometers, which interact with a possible vertical moving aether and that is the subject of his presentation. Even James DeMeo was very supportive of these efforts before his untimely passing. Recently, two archives have been added to the presentation package - one is about 1 gb and one is about 250 mb. In addition to the presentation itself, you will receive a pdf of the PowerPoint presentation given and these 2 zip files with a lot of videos and data documenting Chris' experiments.

This presentation is also 50% off for a limited time and you can get a copy here with all the extra files previously unavailable: https://emediapress.com/shop/ether-drift-experiments-with-the-vertical-component/

 

AMMANN ATMOSPHERIC GENERATOR FROM THE EARLY 1900'S - SPOKANE SYNCHRONICITY

I first learned of this possibly from some pictures on Facebook. In the early 1900's, a couple of brothers had a car, which they strapped an "atmospheric generator" to and it supposedly ran on energy from the air.

Interestingly enough, there's a strong connection to Spokane, Washington. Also, there's an interesting connection to an actual building in Spokane owned originally by one of the brothers, which turns out to be the location where most of the ESTC presentations were edited! Synchronicity has been not just my favorite word for years but also one of my favorite experiences and there is no end to the amazing synchronicities that persist.

Learn about the Ammann brothers' Atmospheric Generator here: https://emediapress.com/2024/01/08/ammann-atmospheric-generator/

 

DO YOU USE HOTMAIL OR ANOTHER MICROSOFT EMAIL WITH EMEDIAPRESS OR OUR OTHER WEBSITES?

We've recently had problems with sending email to Hotmai and other Microsoft owned emails. If you have one of these emails and contacted us, joined a website, had a customer service question and so on but haven't heard back, this is why. Microsoft goes overboard on blocking emails from servers when even a small number of their email receive emails in response to some spammer or bot that uses Hotmail emails to cause trouble. We have it fixed now so if you have emailed us without a response, just email us back. We can't promise it will happen again because it problably will, but this is what we have to deal with in the digital age. We are doing our best to minimize these kinds of problems, but there's no guarantee. The best solution is to stop using Microsoft based emails but for many of you, that isn't practical and we understand that but just so you know - we respond to all our emails.

 

LIVE EPD ZOOM CALL JAN 20, 2024, 1PM PACIFIC TIME ZONE - 20:1 SCALE MODEL REPLICA OF TESLA'S COLORADO SPRINGS MAGNIFYING TRANSMITTER

There's going to be a heavy, if not exclusive focus on the 20:1 Colorado Springs Magnifying Transmitter scale model replica. These transformers were first presented in 2019 by Eric Dollard at the Hayden Eagles Lodge for the Energy Science & Technology Conference. They were built by Bruce Gavin and was based on the engineering specifications provided by Eric Dollard. It would be a good idea to get a copy of this presentation and study it if you haven't seen it yet - especially, if you're going to join us on the live call and ask question: https://emediapress.com/shop/theory-calculation-operation-colorado-springs-tesla-transformer/

After this year's conference Eric Dollard and Adrian Marsh, PhD presented what is essentially Part 2 of that original presentation here at my shop in Spokane. You can watch it for FREE here - it's 1 hour 41 minutes: https://www.youtube.com/watch?v=fENwpuHaaXo

Again, most of the discussion will be about what you see in that free YouTube video.

Time: Jan 20, 2024 01:00 PM Pacific Time (US and Canada)

Join Zoom Meeting
https://us06web.zoom.us/j/81868518214?pwd=z5SbA5DEC3hFjFwLv9aRbMNqJadwQF.1

Meeting ID: 818 6851 8214
Passcode: 383445


Sincerely,
Aaron Murakami
Emediapress.com

 

2023 ENERGY SCIENCE & TECHNOLOGY CONFERENCE PRESENTATIONS RELEASED

Peter Lindemann - Electric Motor Secrets Part 3
Eric Dollard - History, Theory & Practice of the Four-Phase System
Eric Dollard - Four-Phase Analysis Of BWV536, J.S. Bach
FREE DOWNLOAD - Panel Discussion 1
Jeremiah Ferwerda - Tesla Turbine Powerplant
Griffin Brock - Recent Research On The Tesla Radiant Matter Tube And Related Phenomena
FREE DOWNLOAD - Parker "Dr. Parkinstine" Edmondson - Tesla Coil & Diathermy Machine Demonstration
Adrian Marsh, PhD - The Golden Ratio Discharge
Mark Dorsten & Aaron Murakami - William Skinner's 1939 Gravity Power Machine
Hakasays - Slaying Maxwell's Demon
Eric Dollard, Adrian Marsh PhD & Aaron Murakami - Ultra Low Frequency Amplifier-Modulator
FREE DOWNLOAD - Panel Discussion 2
Chris Machado - Ether-Drift Experiments with the Vertical Component
Prof. Robert Haralick - Water, Frequencies and Experiments
FREE DOWNLOAD - Katja Gwynn, PhD - The Art of Freeze Drying - Freeze Dryer details here: Harvest
FREE DOWNLOAD - Panel Discussion 3
Adrian Marsh, PhD. - The Toltec System of Knowledge
Abner Weintraub - Metallic Copper and Human Health
Paul Wheaton - Earth Integrated Structures and The Truly Passive Greenhouse - More permaculture info here: Permies
Jim Gale - Food Forest Abundance - More Food Forest info here: Food Forest
 

2023 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2023/
2022 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2022/
2021 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2021/
2020 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2020/
2019 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2019/
2018 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2018/
2017 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2017/
2016 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2016/
2015 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2015/
2014 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2014/
2013 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2013/
2012 ESTC PRESENTATIONS - https://emediapress.com/product-category/energy-science-technology-conference/2012/

 

 

 


POB 10029
Spokane WA 99209
USA


Unsubscribe   |   Change Subscriber Options